rear of the chainsaw

How To Start A Chainsaw

Starting a chainsaw can seem like quite the chore if you’re new to using them, or if you’ve worn yourself out pulling on the rope.  But don’t despair, there is a simple, easy to follow, step-by-step method that will work on almost any chainsaw on the market.  Follow these steps and you’ll be able to […]

Continue reading
men sharpening the chainsaw

How To Sharpen A Chainsaw

When the chain on your chainsaw gets dull, it won’t cut properly, burns the wood, overheats the chain, and takes an extraordinarily long time to cut wood.  If you learn how to sharpen it yourself, you’ll keep your chainsaw operating at peak efficiency and get more done.  Sharpening the chain only takes a few minutes […]

Continue reading
safety equipments

How To Cut Down A Tree With A Chainsaw

Cutting down a tree is referred to as felling  it.  When you’re felling a tree, you can’t go out and just start cutting.  There are several important things to consider before you begin that part of the job.  These are safety, the direction the tree will fall, your escape route, and how to cut. Safety […]

Continue reading
scroll saw

How Does A Scroll Saw Work

Scroll saws are used for fine woodworking where you want the speed and power of an electrical saw combined with the precision of a fine handheld blade or Exacto knife.  They have a very slender blade that moves up-and-down at between 400 to 1,800 strokes per minute.  Although most people think of scroll saws being […]

Continue reading
table saw supplies

How To Make A Table Saw Fence

A table saw fence, or ripping fence, is a long guide used to keep a piece of wood properly aligned when you’re making long straight cuts, usually along the grain of the wood.  We’ll guide you through the process of making a simple fence. Supplies To build this fence you’ll need; a jigsaw, a 2×4 […]

Continue reading
crosscut sled

How To Build A Table Saw Sled 101

A table saw sled is also known as a crosscut sled.  As the name implies, it is a tool for safely making perfect crosscuts on a table saw time after time after time.  The emphasis here is on safety.  Crosscuts are typically made on short pieces of wood which makes them dangerous because the end […]

Continue reading
1 9 10 11