Last updated on:
We tested dozens of tools as we hunted for the very best track saws on the market. Our selections were chosen on the basis of their strength and safety features, as well as their overall effectiveness on the job.
We also made a point of choosing tools that will appeal to a broad range of buyers. Whether you’re looking for a best-in-class product, or simply something that will give you the most bang for your buck, there is a product on this list for you.
|Makita SP6000J1 6-1/2″ Plunge Circular Saw Kit|
|Festool 575388 TS 55 REQ Plunge Cut Track Circular Saw||3 Years||4.5/5|
|SHOP FOX W1835 Track Saw|
|DEWALT DWS520CK 6-1/2-Inch 12-AMP TrackSaw Kit||3 Years||4.2/5|
|WEN 36055 9-Amp Plunge Cut Circular Track Saw||2 Years||4.1/5|
The Makita SP6000J1 has a powerful 12-amp motor that will be able to work through hardwoods and other tough materials.
It also makes use of a variable speed trigger that allows you to select speeds between 2000 and 5200 RPMs. The variable speed trigger makes it easier to give each job the unique approach that it deserves and needs.
The Makita includes an electronic control board that allows you to monitor and maintain consistent speeds. The precise feedback makes it easier to get clean, flush cuts that exclude frayed ends and splinters.
You will need to be willing to pay for the benefit of these high-quality attributes. This is one of the more expensive saws on our list. However, if you want a reliable, well-rounded tool, this is a great option to consider.
The Festool 575388 puts an emphasis on safety with a unique blade setup that naturally reduces the risk of kickback. The blades are spring-loaded and designed to not pinch against the material, helping you to avoid dangerous misfires.
The generous 55-inch guide rail is able to safely accommodate cuts up to 49 inches long. As a bonus, the guardrail is also specially fitted to work with other Festool products, including its router and its circular saw.
As good as this tool sounds, it is not without its tribulations. For one thing, this is another pricey saw. The manufacturer also does not include clamps, which is an essential reason for using a track saw in the first place.
For budget buyers, we have the Shop Fox W1835. It’s an affordable saw that provides premium features. The 120-volt motor is able to rip through 9070 feet per minute (in theory anyway), making it good for fast, efficient work on softer materials.
The lightweight build makes the tool very portable. The dust port means it can be hooked up to a shop vac for healthy lungs and an easy post-work cleanup.
Granted, this saw won’t be for everyone. The motor that you get with this unit is not exceptionally powerful. For basic jobs, like ripping plywood, it will do just fine. For bigger tasks like working with hardwoods, it will lead to lots of splintering.
It’s also worth noting that the accessories included are minimal. You don’t even get a guide rail, which means you will probably be making some additional purchases before you actually fire the tool up.
It doesn’t get more brand-name than DeWalt. The company is well established in the world of tools for the simple fact that it makes good stuff. This is no exception. The DWS520CK’s powerful 12-amp motor will be able to rip through hardwoods that are up to two inches in thickness.
It also includes a great anti-kickback system with a guard and a special blade setup that makes the tool as safe to use as possible.
The guide rail that comes with the package works both ways, allowing you to make dual-sided cuts. The design concept is also surprisingly low-profile, which makes it good for use in tight spaces.
You’ll need to pay a good deal for these high-end features. DeWalt is just as known for being expensive as it is known for making quality tools.
Durability is a major concern. The plastic elements of the tool feel fragile and may break easily in the event of trauma.
The moderately priced WEN 36055 is a good option for buyers who need a track saw for light work. With nine amps of power, it won’t quite have enough juice to take on the thickest of hardwoods. However, with average stock, it shouldn’t have any trouble making nice, clean cuts.
The guide rail track that comes with the package is a generous 27 inches in length, which gives you about 20 inches of cutting room.
For the sake of safety, the knives will automatically retract in the event of excessive friction, thus reducing the likelihood of kickback.
There are no major issues, but the saw is limited by its modest power levels.
The Bosch Tools Track Saw is a high-end tool with a series of high-end features. The plunge cut mechanism is specially designed for accuracy, while the blade can be efficiently worked both ways for a variety of different cuts.
For added accuracy, the system is controlled via an electric mainframe that allows you to accurately monitor the amount of power that you are using. It also benefits from a compact build that allows easy transportation.
There are a few disappointments. You pay a lot for this saw, and unfortunately, you don’t even get the guide rail. You can get similar tools for a lot less money.
The Triton TTS1400 is an affordable but relatively basic saw that will handle small jobs well. The handles are made to be ergonomic, while the dust port will do a good job of handling messes, and ensuring the safety of your shop area. It also has an anti-kickback mode that can help mitigate the risk of injury.
These things said, if you work with heavy stock, this saw probably isn’t going to be an option. With tougher materials, the cuts tend to get splintery and very rough.
The exterior material of the saw itself also leaves something to be desired. It feels very fragile and isn’t likely to stand up well to wear and tear.
Chances are that the only reason a person would get the Grizzly T10687 is because they’re hoping to save some money. It’s one of the most affordable options on our list, making it great for buyers on a budget.
Just understand that you’ll lose out on a lot of important attributes. For one thing, this saw isn’t able to work with hardwoods. It produces splintery, ugly cuts that users with high standards won’t appreciate. Some people even report the motor dying altogether when put to the test with tougher woods.
It also just feels poorly made. The plastic exterior is cheap and unreliable, not likely to hold up against physical stress.
Below we will take a look at some buying considerations that will help you finalize your purchase.
Most high-end saws will include a variable speed component. This allows you to customize the approach that you take to each job. The wider the range is, the more versatile the saw will be. In general, higher speeds are good for making a flush cut on hardwoods, while slower speeds can be beneficial to softer, more delicate woods.
Without this feature, you’ll be limited in the type of work you can accomplish.
You can never have too much power. A strong motor will be able to work with lots of different types of materials. An underpowered saw will produce splintering and frayed ugly edges when it is pushed to its limits. Hardwoods can even overload the motor, breaking a tool altogether.
The more power you have on hand, the less likely problems of that nature are to occur. How much power is needed depends largely on the user. If you’re working with lots of tough material, you’ll want as much power as you can get. Something in the 12-amp range should be to your liking.
If you’re working with softer, easier materials, you can get away with a little less.
It’s also handy to know what the saw you’re buying includes. Is it just the tool? Or are you getting blades, a case, or a guide rail? The more the tool comes with, the easier a time you’ll have getting started.
At the very least, you’ll want something that comes with a blade or two. This is a part of the tool that you’ll need to replace from time to time, but the inclusion of blades will save you some money, and help to avoid a headache the day that you get the saw.
The length of the guide rail will affect the type of work you’re able to do. The longer the guard rail, the longer the cuts you will be able to make.
You can often purchase guardrail extensions if you need more space, but it can be difficult to find compatible products. It’s also just pricier. Most of the time, it will be more economical to buy one long guide rail than it would be to purchase several shorter options.
Many saws suffer from kickback. It’s a dangerous hazard that can lead to a major injury. Fortunately, companies now prioritize mitigating the risk of it.
Some of the saws on our list protect against kickback via a variety of methods. Some have special blade guards. Others configure the blades in ways that reduce the likelihood of the type of friction that can lead to kickback.
Some of the saws on our list have guide rails that are compatible with other tools as well. This is a handy feature to have if you like to buy from the same company a lot. For instance, the Festool guide rail is able to work with circular saws and other tools from the company.
It’s a modest benefit, but also a nice thing to have for some buyers.
Some form of dust collection is a true must when working with high-powered saws. A dust port is critical because it lets you hook the tool up for a shop vac, allowing easy cleanup, and a lower risk of health concerns. Sawdust is a known cancer-causing agent, which makes it important to keep it in the vacuum and not in your lungs.
RELATED READING: what can you use a track saw for? A closer look at different uses
With our track saw reviews over, the time to decide has arrived. Do you want something with raw power and lots of high-end features? If so, you could do a lot worse than our top choice, the Makita SP6000J1 6-1/2″ Plunge Circular Saw Kit.
Of course, there are also great choices out there for buyers on a budget. If you want to get something great without spending a ton of money, think about choosing our best for the money pick, the Shop Fox W1835 Track Saw.