Best Miter Saw Stands of 2019 – Top Picks & Reviews

Last updated on:

A rolling miter saw stand

We used to refer to this as carpenter’s yoga. Your miter saw is positioned on the ground. You’re trying to cut just a small bit off of a 12-foot section of 2×4. No matter how much force you apply by hand, you can’t seem to hold the board down. So, you extend one leg out as far as you can, reaching your toes up under the board and lifting it with your foot until it’s flat on the miter base. Holding this elongated position, you slide the board down, checking your blade against your mark to make sure the board will be positioned correctly before making your cut.

If you don’t want to be forced to improve your balance and flexibility just to use your miter saw, then you may be in the market for a miter saw stand. Height adjustability, portability, material length, and more, all play a role in the effectiveness of a particular model. To narrow down the choices, the following five reviews compare the best ones available.

A Quick Glance at Our Top Picks:

A Comparison of our Favorites in 2019

IMAGE PRODUCT
Best Overall
Bosch T4B Gravity-Rise(Rating: 4.9/5)
  • Pneumatic wheels for easy, durable rolling
  • Big jobs are easier
  • Very stable
DEWALT DWX726(Rating: 4.7/5)
  • Stable and durable
  • Easy to assemble
  • Adjustable mounting rails
Best Value
BORA Portamate PM-4000(Rating: 4.6/5)
  • Can take on projects up to 500lbs
  • Foldable
  • Comfortable work height
DEWALT DWX723(Rating: 4.3/5)
  • Made of durable aluminum
  • Lightweight
  • Has a wide base
HICO UWC4000(Rating: 4.1/5)
  • Simple to use
  • Portable and lightweight
  • Holds as much as 500lbs

5 Best Miter Saw Stands

1. Bosch T4B Miter Saw Stand – Best Overall

Bosch T4B Gravity-Rise

 

This Bosch miter saw stand is fully equipped. The namesake Gravity-Rise system makes it very easy to open your stand up to proper height with very little effort involved. At 77 pounds, it’s a monster of a stand. Luckily, 8-inch wheels make it easy to roll around. Getting it in and out of the truck is still going to be fun though! With an impressive material capacity of 18 feet, this stand is leading the pack, making it possible for you to easily work with materials of any length.

No matter what saw you currently have, it should fit on this stand. We also found that this stand was very stable, with no rocking or swaying in any direction. To that end, it has adjustable feet that allow you to make it completely level on any surface. Helping achieve this, a telescoping leveling leg is built-in to provide stability when working on uneven surfaces. In case you’re wondering, it does fit through a standard doorway. Expect to shell out a pretty penny for all these great features though.

Pros
  • Stable and solid
  • Impressive 18’ material capacity
  • Wheels for transport
  • Universal saw fit
  • Adjustable feet for leveling
Cons
  • Premium price
  • Very heavy 77 pounds

2. DEWALT DWX726 Miter Saw Stand

DEWALT DWX726

With a weight capacity of 300 pounds, this DeWalt miter saw stand is very stout. It features pneumatic assisted raising and lowering to make it easy and quick to set up or break down. The mounting rails adjust very easily to accommodate a wide range of different sized miter saws. At 67 pounds, this is a pretty heavy unit, but it’s also very solid and we didn’t experience any unwanted movement while working with it. Since it is so heavy, DeWalt has built two wheels into this design to make it easy to roll around.

While this stand does perform well in many aspects, one place where it missed the mark is with the material capacity. Providing a pretty poor 8 feet of material support, this stand won’t make it easy on you if you need to cut any extra-long boards. For many though, 8 feet is plenty since that’s the length of a standard 2×4 anyway. Overall, it’s a stout and stable stand and we think it’s a close second to the Bosch, but at a more affordable price.

Pros
  • More affordable
  • Very stable
  • Wheels for transport
  • 300-pound weight capacity
Cons
  • Only 8’ of material support
  • Heavy at 67 pounds

3. BORA Portamate Miter Saw Stand – Best Value

HTC PM-4000 PortaMate

This folding miter saw stand from BORA is a no-frills added tool that performs its job admirably, but without any need for extras or conveniences. We think its combination of very low price and high strength make it the best miter saw stand for the money. This stand is not height adjustable. It sits at a comfortable height of 36 inches, which should be a good compromise for most people. There are no wheels, but they’re not necessary since this stand only weighs 30 pounds and is easily carried. But don’t let the light weight fool you, this is a very sturdy stand. With a weight capacity of 500 pounds, you’re unlikely to even get close to pushing this stand’s limits.

The material capacity of the BORA Portamate isn’t class-leading by any means, but it’s also not the bottom of the pack. With over 9 feet of material support, it’s still punching above its weight. However, we weren’t thrilled with the extension arms. When you tighten them down all the way, they would twist and no longer be square. This meant we had to spend more time making adjustments than we would have liked, though we did work it out in the end.

Pros
  • Very affordable
  • 500-pound weight capacity
  • Only weighs 30 pounds
Cons
  • Only 9’ material capacity
  • Extension arms twisted when tightened
  • No height adjustability

4. DEWALT DWX723 Mitre Saw Stand

DEWALT DWX723

We had high expectations for this miter saw stand from DeWalt, a company that is known for producing high-quality tools. Unfortunately, this particular item does not live up to the standards we’ve come to know them for. On paper, everything looks good. It’s pretty light at just 35 pounds, although it’s got a very respectable weight capacity of 500 pounds. The support arms extend to hold up to 16 feet of material. Even though it’s priced more than double what other models with similar features are going for, it’s still a good stand based on its capabilities.

Where this stand failed though, is in the way saws are meant to mount to it. It’s difficult to make work with just one person. The release levers are also very awkward to use, and they’re cheaply built as well. After a few weeks, one of ours broke making it much more difficult to mount and remove the saw. If these problems weren’t present, this stand would probably rank much higher on this list.

Pros
  • Lightweight, just 35 pounds
  • 500-pound weight capacity
  • 16’ of material support
Cons
  • More expensive than similar competitors
  • Saw mount is awkward to use
  • Saw release levers are cheap
  • Poor longevity

5. HICO UWC4000 Miter Saw Stand

HICO UWC4000

For the low price of this HICO miter saw stand, we were surprised at its impressive specifications. Of course, it wasn’t surprising when it didn’t manage to live up to our expectations. Let’s start with the positive traits. It’s affordably priced, our first plus. It’s also incredibly lightweight at just 23 pounds, though it has a weight capacity of 500 pounds. This is a pretty impressive strength-to-weight ratio. This would definitely earn the HICO a higher position on this list if it weren’t for the terrible design of the support arms.

The arms are made of square tubes, but they’re sliding into round tubes. The plastic broke when tightening the knobs to hold them in place. Even though this is a very low-cost model, it’s not even worth the low price if it can’t hold up to even very basic usage.

Pros
  • Affordable
Cons
  • Poorly designed
  • Square extension arms slide into round tubes
  • Tightening the arms breaks them

Buying Guide

Now that you’ve seen how the five best miter saw stands stack up against each other, you may be itching to go out and get one of your own. Before you do, let’s go over the important functions that you’ll want yours to possess. These are the same features we compared for our reviews since they are truly what determines whether a particular miter saw stand is a useful tool or not.

working with a miter saw stand

Weight Capacity

Some miter saws are hefty tools that can be a pain to lug around. Your stand has to support much more than just the saw though. If you’re only going to be cutting trim pieces, then weight capacity may be of less concern. If you’re cutting large lumber, sometimes it can add substantial weight. The last thing you want is for your stand to collapse under the weight of your saw and lumber, becoming potentially dangerous and definitely causing damage to the saw. Be sure the stand you choose has a high enough weight capacity that you won’t even have to think about it for the work you intend to perform.

Saw Compatibility

It would sure be disappointing to be full of excitement, ready to test out your new miter saw stand, only to find out that your saw doesn’t fit. While many stands are universal, some are only able to work with saws of certain sizes. Check what size saw you have before making a purchase, so you don’t end up having to regret your decision.

Saw Compatibility

It would sure be disappointing to be full of excitement, ready to test out your new miter saw stand, only to find out that your saw doesn’t fit. While many stands are universal, some are only able to work with saws of certain sizes. Check what size saw you have before making a purchase, so you don’t end up having to regret your decision.

Weight of Stand

If you’ve already got a heavy miter saw to lug around, you probably don’t want to add the extra hassle of an awkward and bulky stand to the mix. Of course, heavier stands are often very strong and stable, so it may be a tradeoff. Some of the bigger, heavier stands actually feature wheels to make them easier to move around. If yours doesn’t, then you’ll be carrying that weight around in addition to your saw.

miter sawing

Height Adjustability

Not every stand features the ability to change height settings. Many are set to a single height that is meant to be a good compromise for people of all heights. But what if you’re the only one who uses the saw and you want it set at the most comfortable height you can find? Well, some models will allow you multiple height settings to choose from, so you can adjust the stand to suit your exact preferences.

Folded Size

Your miter saw is not always going to be in use. When it’s not, neither is the stand, but both need to be stored somewhere. If your miter saw stand is large and obnoxious and doesn’t fold into a smaller form, then you may be devoting quite a bit space to its storage. This is one of the main reasons not to just build one yourself from whatever wood you have lying around. You might save a few bucks, but you’re not going to save yourself any headache in the long run.

Stability

A good stand should be rock-solid, never moving when the saw kicks on. If your saw wobbles, jolts, or vibrates, it’s more than just annoying. With your fingers that close to a blade spinning at thousands of RPM, do you really want to take those kinds of chances? Make sure you find a stand that sits perfectly level and holds steady through any pressure.

Price

The most expensive option on this list is nearly five times more expensive than the most bargain-priced one. At the end of the day, they both perform the same function. All they do is hold up your miter saw and your materials to make it easier to cut. While certain models may have features that improve the convenience and ease which they perform that job with, they’re all built to perform the same single function.

If you use your saw every day to earn a living, then you’ll probably find it a worthy investment to spend a bit more and get those features that make you more productive and comfortable. On the other hand, if you’re a weekend warrior who only needs to make use of the miter stand a few times a month, then some of those extra features may not even be noteworthy for you. You’ll have to determine which features you really need and base your budget on that.

SEE ALSO: our favorite budget miter saws

Conclusion

After making it through our reviews and buyer’s guide you should have a pretty idea of what features you expect your miter saw stand to have and which stand might best meet your needs. We think the Bosch T4B is the best overall thanks to its incredibly stable and solid build and 18-foot material capacity. In a close second, the DeWalt DWX726 offers similar capabilities at a lower price point. When you just need function and you don’t want to spend the extra money on fancy features, then we recommend the BORA Portamate BM-4000. Weighing only 30 pounds with a 500-pound weight capacity, this stand is less than half the cost of the DeWalt. No matter which of these stands you choose, we’re confident that you’ll be satisfied with the robust quality.

We think you’re also going to find this page relevant