Last updated on:
Proper protection is essential whenever you’re using any kind of power tool. However, chainsaw use requires some particular items that are unique to that activity, such as chainsaw gloves. These gloves are unlike all other types of gloves, and different from each other. Each one has its own safety features, and it can be confusing to read descriptions of them and choose the best one for you. That is why we’ve reviewed many of them and compiled a list of six that we think may be of use to you.
|Husqvarna Chainsaw Protection Gloves|
|Youngstown Glove 05-3080-70-L||Returns||4.65/5|
|Oregon Large Chain Saw Safety Gloves|
|Elvex CSGLV-LG Prolar Chainsaw Gloves||None||4.3/5|
|Endura Hi-Viz Cut-Resistant Chainsaw Gloves||None||4.2/5|
The Husqvarna 579380210 Chainsaw Protection Gloves are made so that the left-hand glove is cut-resistant. The backs are made of stretchable spandex fabric for comfortable fit. The palms are made of goatskin, which is more durable to protect against penetration. They’re made with high-visibility colors so you can find them after setting them down while taking a break. They also have a reflective logo, which helps you to see where your hands are at all times, even if the light isn’t the best.
You’ll want to order these gloves a size smaller than you would normally wear, as they run larger than other gloves do. They are suitable gloves, but we did find that the fingertips wear through relatively quickly, especially when compared to the palms.
The Youngstown Glove 05-3080-70-L is lined with Kevlar to provide lots of protection against cuts and punctures. The ANSI/ISEA cut level scale ranges from A1 to A9, and these gloves are at an A4 level, which is within the recommended levels. The same puncture ratings range from one to five. The Youngstown 05-3080-70-L gloves rate four out of five, almost perfection. There is a problem with the puncture protection, though. There are several pads in the palms of the gloves. The pads provide excellent protection, but there isn’t any between the pads or between the fingers of the gloves.
These gloves have non-slip reinforcement on the palms to give you a better grip on your chainsaw and to make them more durable. They are machine washable, which can break them down. Even though they’re double-stitched to give them a longer life, they really don’t last very long. They’re suitable gloves for the money that they cost, though.
These gloves run smaller than other brands, so we recommend purchasing a size larger than you would typically wear. They are comfortable and work well, for the most part, but we thought that they were too thick. It was hard to feel anything through them.
The Oregon Large Chain Saw Safety Gloves fit true to size, and are snug at the wrists so things can’t get inside to irritate your hands. They’re comfortable to wear, for the most part, but they can be a little stiff, making some hand movements more difficult.
Only the left glove is reinforced to make it more durable, since it is nearest the chain. That’s great, but the reinforcements are enough to make the left glove fit tighter than the right one and make your hands feel unbalanced. The leather on the palms is a little thin, so be aware that they can get punctured more easily than some other gloves.
The Elvex CSGLV-LG Prolar Chainsaw Gloves have layers of Prolar protection on the back of the left-hand glove to protect against chain breaks and other flying debris. This Prolar protection does make the gloves heavier than others on the market. It also makes the weight of the two gloves different, so they feel mismatched.
These gloves are made of breathable fabric. This helps keep your hands from sweating during warm weather, which can cause your hands to break out in a nasty rash. They are also waterproof to help keep hands dry and warm in wet weather. They don’t have any insulation, though, so they’re not suitable to use in cold weather.
The Endura Hi-Viz Cut-Resistant Chainsaw Gloves have goatskin leather palms to help protect against cuts and penetration injuries and cut down on vibration from the chainsaw. The protective covering is thin, though, and not great at protecting your hands. We would almost recommend wearing a thin second layer of cut-resistant material as a back-up, just in case. The Endura gloves run large, so if you get the same size you usually get, you should have plenty of room for a second layer.
The fingers and palms are made of straight polyurethane that offers no protection whatsoever. The palms are slippery, so you don’t get a firm grip on the chainsaw. The material on the back of the gloves is Lycra, which allows your hands to breathe and gives them some water-resistant protection. There’s also velcro at the wrists to help keep flying debris from getting in.
The Vgo Chainsaw Work Gloves are made from premium goat leather to make them comfortable and allow you to complete your work more efficiently. The material that the fingers are made of will enable them to breathe, but it also makes them slippery when they get wet. Textured PVC in the palms makes these gloves more durable to protect against cuts and punctures.
The protective layer is only on the left-hand glove, since that’s the hand that is usually closest to the chainsaw blade. There’s no protection whatsoever in the right hand. These gloves do have velcro around the wrists so nothing can get inside the gloves, but that isn’t too much of an issue because these gloves run small. If you don’t want them too tight, order a size larger than you would typically wear.
Whenever you’re using any sort of power tools, it’s crucial to use the proper equipment to help ensure your safety. Chainsaws are no different. Chainsaw gloves are vital for protecting your hands from the elements and airborne debris flying from the saw. This quick guide will tell you about some essential things to consider while shopping for the best chainsaw gloves.
The best gloves are made of leather. Leather is comfortable and tear-resistant, making it great for heavy-duty jobs. Leather also gives you an excellent non-slip grip in different weather conditions. The more leather on the pair of gloves you purchase, the more hand protection you will have.
Kevlar is one of the most durable fabrics. It’s used mostly in the making of bulletproof vests and recreational helmets due to its strength. It is used in chainsaw gloves to absorb some of the vibrations. It is also often used to stitch the gloves together for added strength.
Chainsaw gloves should have a second inner lining that will slow down the chain, or stop it entirely, if they happen to come into contact with the moving blade.
Most people are right-handed, so they will be holding the handle with their right hand, leaving the left as the hand closest to the blade. For that reason, you’ll often find that the glove for the left hand has better protection features than the one for the right.
There will be times that you’ll need to cut wood in wet conditions, like rain or snow. It’s imperative that your hands stay dry, or they can break out in a nasty rash. Be sure that the gloves you choose have some sort of water-resistant protection.
Chainsaw gloves take a lot of abuse from handling logs, and all the woodchips and other debris flying around. Having a pair with excellent abrasion resistance will help to prolong the life of the gloves.
EN and ANSI are the safety standards that must be met to be compliant with safety regulations in the U.S. Chainsaw gloves undergo rigorous testing to make sure that the resistant materials are suitable to stop chainsaw chains when they’re moving at certain speeds. If the gloves pass all the safety tests, only then are they approved to be released for public use.
When you’re cutting wood, your gloves will get dirty. They’ll need to be washed at some point. Read the wash and care instructions before you clean them. Some gloves can be machine washed. Others, like those with some sort of rubber protection, may deteriorate if they are run through a washing machine. They will last longer if they are hand washed.
The size of your gloves determines how comfortable your hands are, as well as how firm a grip you have on the saw. If they’re too big, they may allow your hands to slip. If they are too tight, you may cut off or reduce the blood supply to your hands, causing discomfort.
Try some gloves on to know what size you need. If you’re purchasing gloves online, know what size you’ll need before placing your order. It’s imperative that you know the size of glove that fits your hands. You also need to know if the brand you’re ordering fits true to size, or runs smaller or larger than standard gloves.
Now that we have outlined some essential features in chainsaw gloves, let’s look at the six we reviewed that we believe may meet your needs:
1. Husqvarna 579380210 Chainsaw Protection Gloves – Top Pick
2. Youngstown Glove 05-3080-70-L – The Runner-Up
3. Oregon Large Chain Saw Safety Gloves – Best for the Money
4. Elvex CSGLV-LG Prolar Chainsaw Gloves
5. Endura Hi-Viz Cut-Resistant Chainsaw Gloves
6. Vgo Chainsaw Work Gloves
Hopefully, you now have enough information to help you make an educated decision about which chainsaw gloves are best for you.