Category Archives for Miter Saw Guides

miter saw

How To Cut Crown Molding Using A Miter Saw

How to cut crown molding using a miter saw? Recently, we have constantly been receiving such query from our loyal readers. Of course, we wouldn’t leave this unanswered. As much as possible, we want to get through all the aspect of crown molding. After all, it is one of the basic molding designs that are essential for home improvements and interior decoration.

Crown molding is a technique used to create fine designs to a finished edge. Usually, this method is being used for capping pilasters, cabinets, and walls. Moreover, crown molding is very common in the creation of door hoods and cornice assemblies.

The process is usually applied to the area where the wall meets the ceiling. Most of the expert modelers do not implement this technique against the ceiling or the wall. Instead, the mold is being placed in the middle of the wall and ceiling. When you look at it from a cross-section perspective, you will see that these three form a “hollowed” triangle.

As a matter of fact, crown molding is quite tricky. The installation process may prove to be difficult for beginners. However, if you have a miter saw, then you can certainly accomplish this task. You just have to learn the proper process of crown molding. In this way, you can do several small projects on your own, without even needing the help of professionals!

Here is the process of how to make crown molding!

How To Cut Crown Molding Using A Miter Saw

  1. Start by making a scarf joint in the middle of a long run. To do this, you have to place the crown molding on an upside down position on a miter saw table. Moreover, the molding should be held at an angle that is the same as the installation position.
  2. Adjust the cutting angle of the blade at 45 degrees. After that, you should start making cuts in two lengths of molding. In this way, you can create a precise scarf joint.
  3. Once again, you need to adjust the blade of your miter saw at 45 degrees to the left. You need this so that you can make the make a corner joint on the outside of the crown molding. Start by cutting the first length of the material.
  4. When you are done, you should rotate the miter saw to the right (still 45 degrees). Once the blade is already in the proper position, you can already start cutting the second molding piece.
  5. Make a square cut to the first piece of the crown molding. Fit it tightly into the corner. This is the process of making a precise cut for your inside corner joint.
  6. You need to miter the second piece of molding at a 45-degree angle.
  7. Take a pen and mark the leading edge of the crown molding.
  8. Use your miter saw, or a coping saw to cut the path of the leading edge.
  9. Afterward, you can already smoothen the edge you cut with a heavy-duty sandpaper (preferably, a 100-grit). In this way, you can create an elegant tight joint!

Conclusion

Constant practice is necessary in order to cut a crown molding using a miter saw. Nobody expects that you can achieve this process in the first try. You have to experiment with the different cutting angles so that you can get the right cut for your crown molding. We can guarantee that in the long run, you will be able to create fine interiors in your home! Moreover, you should not forget that a good miter saw can make the difference. Therefore, there is a need for you to invest in this power tool unless you are not really serious about it!

miter saw

How Does A Miter Saw Work

How does a miter saw work? Does it use a special mechanism to operate itself? Well, we will answer all of these questions in this article. So read on!

If you are a carpenter, woodworker, or just the typical DIYer, you should already know the importance of a miter saw. This particular power tool works well in making cuts for door frames, picture frames, window casings, and crown molding. Moreover, you can also use this tool to make precise straight cuts from general woodworking projects. Of course, any saw can do this. However, with a miter saw, your versatility in the workshop is virtually unlimited.

Aside from wood, a miter saw can cut through different objects such as mild metal and several types of cement. If you just use the right blade, this saw can make perfect slices to a myriad of materials. Therefore, it is easy to say that this power tool is suitable for different kinds of projects. Even the typical weekend warrior will really love having this saw.

It is not a wonder anymore why many are curious as to how a miter saw works. After all, it has a design that is almost comparable to a circular saw. Therefore, there is a need to explore the entire system of a miter saw. In this way, you will grow a familiarity with this excellent power tool!

How Does A Miter Saw Work?

You can only discover the entire functionality of a miter saw if you know the whole parts of this tool. Of course, each of these components plays part in the operation of this machine. In the market today, there are different types of miter saws. Such of these are the sliding and compound miter saws. However, their function and system are just the same. There are just some added features that improve their respective performances on various projects.

Let us explore the anatomy of a miter saw.

Motor

The motor is the heart of every power tools. They cannot run without this crucial component. A motor in a miter saw is the one responsible for running the machine. Specifically, it produces the power to spin the circular blade once you start using it. Most of the miter saws you can see today have a motor that has a power rating of 10 to 15 amps. You don’t really need a powerful engine, especially if you are just doing simple house projects. On the opposite manner, you will need a miter saw that runs like a beast in heavy duty applications. Specifically, a motor that has a no-load speed of 3,200 RPM is already decent.

Moreover, there are two types of motors that you can choose. They are the direct drive and belt driven motors. As a recommendation, select the direct drive model because they are ideal for extensive projects!

The Blade

A saw would be useless if it doesn’t have a blade. After all, the cutting power of a miter saw is what you are really after. Once the motor starts running, the power it produces is being converted to torque. In return, the torque enables the blade to spin at a very fast rate.

By default, a miter saw comes with a standard blade. Usually, this blade is perfect for rough cuts, such as thick workpieces. However, if you are planning to do fine finishes in your woodworking project, then the standard blade is not enough. You will need to purchase several types of the blade to accomplish this. Specifically, you should have an elegant and high-quality blade to improve the precision and smoothness of your cutting.

The Miter

This tool got its name from this component. The miter is the one that indicates the angle of your cuts. Most of the time, the default angle of a miter is set at 45 degrees. Moreover, it usually works on one side. However, some of the best miter saws can do miter cuts on both sides simultaneously.

The Bevel

A miter saw is popular because of its capacity to create precise and accurate bevel cuts. As a result, this tool can create to cutting angles at once. In doing this, the head of the saw will lean to the side. Moreover, it will also rotate on the table of the saw.

Some miter saws have single bevel design. This means that they can only tilt in one direction. On the other, double bevel miter saws can tilt either left or right. For us, a double bevel miter saw comes advantageous. This is because there is no need for you turn your workpiece in making angled cuts. Of course, the bevel feature of a miter saw is essential. The quality and complexity of its angled cuts are better than any types of saws. Moreover, this ability of this power tool enables you to make crown molding and wooden furniture.

Dust Collection System

Nobody should consider this part as just a mere accessory. In fact, your miter saw may not work well without a dust extraction and management. When you are cutting, it is natural for residues to scatter all over. When you are always dealing with wooden materials, then you know this situation very well. The dust and debris are usually airborne, considering their size. As a result, there is a great tendency that they will enter on the internal components of your saw. Of course, this will lead to a gradual deterioration of your tool.

To further increase the lifespan of your miter saw, it should have a dust collection system. This technology uses a dust extractor or a vacuum to clear your working area from any rubbish.

Laser Guide System

We all know how precise a miter saw can be when it comes to cutting. However, some instances can limit its precision. If you are working on a harsh jobsite or dark area, making a sharp cut is quite troublesome. A laser guide system is essential to ensure that you have optimum visibility while you are working. Some systems are even projecting red lights so that you can clearly see the path you are cutting!

Shaft Locks

The shaft lock or spindle is the one that keeps the blade and shaft intact. In this way, changing the blades is easy and fast!

Table Extensions

A miter saw will also need the help of table extensions for optimal support and stability. The components are usually attached to the side of the saw to provide balance and rigidity!

Conclusion

Overall, the mechanism of a miter saw is not complex. It has a straightforward design and function that are ideal for many amateurs and non-professional artisans. Despite that, its function is not limited to a single application alone. With this tool, you can tackle different projects on your own.

Knowing how a miter saw works is essential for every owner of this tool. It improves your performance in your job, and it teaches you the right approach on how to maintain this tool properly! Now remember, with a miter saw stand, using your miter saw gets even easier.

miter saw

Best Miter Saw Brands

miter saw

There are a lot of options when it comes to miter saws. With the proliferation of different manufacturers today, the existence of this power tool is ubiquitous already. However, if you are a serious woodworker or professional, then you will only opt for the best miter saw brands.

A power tool company releases several models of a miter saw. This is to ensure that every need of their customers is catered. When you go to a trusted company, you can ensure that the saw you will get has excellent construction and features. Therefore, we do not really recommend to anyone to buy power tools from random brands. We are not demeaning the business of these manufacturers. However, we also want to safe-keep people from purchasing a miter saw with poor quality. It is just a waste of money and time.

On the other hand, preferring the best brands of miter saws is truly beneficial. You can assure that the cash you will spend is a form of investment that can give a lot of returns! Moreover, the best miter saws can perform the way you expect them to be. They do not fail even if you use on them on extensive projects. Aside from that, they have a durable design, which guarantees their long lifespan!

Finding the best miter saw brands is not easy. We had done a lot of product testing and consultations to different professional firms before we were able to come up with a list. Of course, this is for you, so there is no need for us to complain. We are just emphasizing that we scrutinized the performance of these brands before presenting them to you! Also remember that finding a good miter saw stand makes using the saw much more easy and efficient.

Here are they!

The Best Miter Saw Brands

  1. DEWALT
    We know that you are expecting this brand on this list. After all, this is one of the giants in the world of power tools. DEWALT has been one of the top producers of construction amenities for several years already. Each year, they release new models of power tools, as an answer to the needs of improvement and versatility.Specifically, their miter saws are something you cannot ignore. They are best on the field, especially in heavy duty applications. The design of their saws is truly sturdy and durable. Moreover, the precision of their cuts always hit the right spot! Their compact and lightweight design also makes their saws very user-friendly.There are a lot of miter saws that you can choose when you go to DEWALT. From corded to cordless designs, this brand has them all! You can guarantee that this manufacturer can satisfy your preferences. Furthermore, the miter saws from DEWALT are notorious for being too powerful!One of their prime opuses is the DEWALT DWS78 miter saw. This miter saw comes with a back fence design that can cut a dimensional lumber with a measurement of 2 inches x 16 inches when set to 90 degrees. If you set it to 45 degrees, it can make 2 inches x 12 inches cuts! This miter saw is very portable, too, compared to its counterparts. It includes a precise miter system so that the accuracy of your cuts will always be present! On the other hand, its no-load speed is 3,200 RPM.
  2. HITACHI
    Of course, Hitachi should be one of the best miter saw brands. It is one of the power tool manufacturers that many industry professionals trust. This should not be a surprise at all because the quality of their miter saws is truly remarkable. Well, it is not an exaggeration, too. We know the rapport that this brand has. Every product they release is something that anyone should anticipate.The miter saws of Hitachi are truly a product of extreme engineering. They included several refinements, such as actuated positive stops, which improve the accuracy of angled cuts. Aside from that, all of the necessary accessories for a miter saw are being utilized by Hitachi. You will be happy that they included an innovative type of dust collection system on each of their saws. Moreover, the presence of pivoting flip fence and large table provides support when you are cutting thick materials.Among their miter saws, you should watch out for their C10FCE2 Compound Saw. This specific miter saw is one of the most highly sought products of many industry professionals. We couldn’t blame them. After all, its features can keep up with any applications and projects. For example, this miter saw can give a no-load speed of 5,000 RPM, which is very powerful for a compact miter saw! Furthermore, a 10-inch blade complements the powerful motor. As a result, this miter saw can virtually cut through anything!Most of the tools coming from Hitachi are user-friendly. They won’t give anyone a trouble on operating their tools. This is one of the reasons why the popularity of this brand will never fade. Just try one of their miter saws. By then, you will know that we are not bluffing.
  3. MAKITA
    In the search for the best miter saws, you will definitely stumble with Makita. This brand of power tools is quite popular around the world, primarily due to their brushless designs on their devices. Aside from that, Makita is known for their industrial-grade power tools. The products they produced can keep up with some of the leading brands of power tools today. In fact, they may be better at some point.We will give their miter saws as a proof of this. When it comes to sharpness and precision of cuts, their miter saws are definitely among the best. The cutting capacity of their saws is truly impressive, too! When the LS1016L Sliding miter saw was released, the competition changed instantly. In the market today, this miter saw has one of the best crown molding cutting capacity. Specifically, it can do 6 5/8-inch of mold cuts when this tool is vertically nested.Moreover, this brand integrates several sets of patented designs on their saws.  This means that such features are only present with Makita miter saws. An example of this is its four-steel rail sliding system. With this ergonomic, the rigidity of the miter saw reached a new level. Therefore, you can be able to cut with precision and stability, even in extended usage.The brand Makita also integrated their six-line ball bearing system on each of their miter saws. This technology allows a smooth and adjustment-free cutting. You don’t need to constantly check the miter saws because they can do automatic “dead-on” cuts.

Honorable Mentions

  • BLACK+DECKER
  • Homecraft

Conclusion

Choosing the best miter saw brands will give you utmost benefits and advantages. Brands like Makita, Hitachi, and DeWalt are already luminaries in the industry of power tools. Therefore, you can expect that their miter saws will perform on any projects. Moreover, these brands use respective technologies to improve the quality of their miter saws. Whether you are professional or just an ordinary DIYer, you will definitely love their saws!